The Darailine digital interface draws a complete online view of the railing according to your own custom dimensions, then breaks down the number of metal modules required for assembly on the balcony. The modular railing configurator is very intuitive and allows you to choose from different styles and colors. As experts in perforated sheet metal, we are able to offer you a wide range of complex custom designs.

Project reference: Indicate the name of the project so that it can be easily found. This identifier allows practical information to be exchanged over the long term. The reference will also be used on the purchase order, the delivery note, and in every conversation with our employees.

Model: selection of the steel support structure model
– Parefit with welded plate for a constant height of 1000 mm

– Gotyra with screw-on plate for variable height from 500 to 1000 mm

Revised guardrail dimensions:

– Based on your measurements taken on the outer edges around the balcony, subtract 50 mm from each value to avoid placing the plates too close to the edges and prevent cracking of the concrete edge when installing the mechanical anchors (reminder of best practices).
– The return elements must be the same size at the left and right angles to facilitate the design of the guardrail.
– If necessary, you can break down your project into several sub-assemblies to obtain a more accurate calculation of the parts required for your needs. This technique will allow you, for example, to create balcony returns of different sizes.

– The result of the balcony length layout has a tolerance of – 20 mm / +20 mm.

Height:

Corresponds to the floor value at the highest point of the handrail. Can only be modified on the Gotyra model.

Project rendering:

Set of values that determine the actual composition of your guardrail kit as it will be delivered. Please note that some dimensions may vary slightly from your original settings.

Reason:

This button allows you to select from decorative sheets, either perforated sheet metal or laser-cut decorations, depending on the abstract, random, plant, progressive, and regular ranges.

Color:

This button allows you to adjust the color according to the RAL color chart available in the configurator, ranging from white to gray to black and many other available shades.

Are the dimensions imposed by the configurator not suitable for you? You can then design your parts one by one, giving you more freedom to choose the format you want.